Celestin Apprentice 4

home *** CD-ROM | disk | FTP | other *** search

/ Celestin Apprentice 4 / Apprentice-Release4.iso / Utilities / Text / OzTeX 1.9 / Dvips / dvips.txt < prev next >

Wrap

Text File | 1993-07-04 | 16.1 KB | 334 lines | [TEXT/tefi]

DVIPS(1) DVIPS(1) NAME dvips - convert a TeX DVI file to PostScript SYNOPSIS dvips [ options ] file[.dvi] DESCRIPTION The program dvips takes a DVI file file[.dvi] produced by TeX (or by some other processor such as GFtoDVI) and con- verts it to PostScript, normally sending the result directly to the laserprinter. The DVI file may be speci- fied without the .dvi extension. Fonts used may either be resident in the printer or defined as bitmaps in PK files, or a `virtual' combination of both. If the MakeTeXPK pro- gram is installed, dvips will automatically invoke META- FONT to generate fonts that don't already exist. For more information, see the manual dvips.tex in the TEX- INPUTS directory. The manual can be printed with the fol- lowing commands: tex dvips dvips dvips -o dvips.ps lpr dvips.ps OPTIONS -a Conserve memory by making three passes over the .dvi file instead of two and only loading those characters actually used. Generally only useful on machines with a very limited amount of memory, like some PCs. -A Print only odd pages (TeX pages, not sequence pages). -b num Generate num copies of each page, but duplicating the page body rather than using the #numcopies option. This can be useful in conjunction with a header file setting char92bop-hook to do color sep- arations or other neat tricks. -B Print only even pages (TeX pages, not sequence pages). -c num Generate num copies of every page. Default is 1. (For collated copies, see the -C option below.) -C num Create num copies, but collated (by replicating the data in the PostScript file). Slower than the -c option, but easier on the hands, and faster than resubmitting the same PostScript file multiple times. -d num Set the debug flags. This is intended only for emergencies or for unusual fact-finding expedi- tions; it will work only if dvips has been compiled with the DEBUG option. For more information on possible values see section 15 of dvips.tex. -D num Set the resolution in dpi (dots per inch) to num. This affects the choice of bitmap fonts that are loaded and also the positioning of letters in resi- dent PostScript fonts. Must be between 10 and 10000. This affects both the horizontal and verti- cal resolution. If a high resolution (something greater than 400 dpi, say) is selected, the -Z flag should probably also be used. -e num Make sure that each character is placed at most this many pixels from its `true' resolution- independent position on the page. The default value of this parameter is resolution dependent. Allow- ing individual characters to `drift' from their correctly rounded positions by a few pixels, while regaining the true position at the beginning of each new word, improves the spacing of letters in words. -E makes dvips attempt to generate an EPSF file with a tight bounding box. This only works on one-page files, and it only looks at marks made by charac- ters and rules, not by any included graphics. In addition, it gets the glyph metrics from the tfm file, so characters that lie outside their enclos- ing tfm box may confuse it. In addition, the bounding box might be a bit too loose if the char- acter glyph has significant left or right side bearings. Nonetheless, this option works well for creating small EPSF files for equations or tables or the like. (Note, of course, that dvips output is resolution dependent and thus does not make very good EPSF files, especially if the images are to be scaled; use these EPSF files with a great deal of care.) -f Read the .dvi file from standard input and write the PostScript to standard output. The standard input must be seekable, so it cannot be a pipe. If you must use a pipe, write a shell script that copies the pipe output to a temporary file and then points dvips at this file. This option also dis- ables the automatic reading of the PRINTER environ- ment variable, and turns off the automatic sending of control D if it was turned on with the -F option or in the configuration file; use -F after this option if you want both. -F Causes Control-D (ASCII code 4) to be appended as the very last character of the PostScript file. This is useful when dvips is driving the printer directly instead of working through a spooler, as is common on extremely small systems. NOTE! DO NOT USE THIS OPTION! -h name Prepend file name as an additional header file. (However, if the name is simply `-' suppress all header files from the output.) This header file gets added to the PostScript userdict. -i Make each section be a separate file. Under cer- tain circumstances, dvips will split the document up into `sections' to be processed independently; this is most often done for memory reasons. Using this option tells dvips to place each section into a separate file; the new file names are created replacing the suffix of the supplied output file name by a three-digit sequence number. This option is most often used in conjunction with the -S option which sets the maximum section length in pages. For instance, some phototypesetters cannot print more than ten or so consecutive pages before running out of steam; these options can be used to automatically split a book into ten-page sections, each to its own file. -k Print crop marks. This option increases the paper size (which should be specified, either with a paper size special or with the -T option) by a half inch in each dimension. It translates each page by a quarter inch and draws cross-style crop marks. It is mostly useful with typesetters that can set the page size automatically. -K This option causes comments in included PostScript graphics, font files, and headers to be removed. This is sometimes necessary to get around bugs in spoolers or PostScript post-processing programs. Specifically, the %%Page comments, when left in, often cause difficulties. Use of this flag can cause some included graphics to fail, since the PostScript header macros from some software pack- ages read portions of the input stream line by line, searching for a particular comment. This option has been turned off by default because PostScript previewers and spoolers have been get- ting better. -l num The last page printed will be the first one num- bered num Default is the last page in the document. If the num is prefixed by an equals sign, then it (and any argument to the -p option) is treated as a sequence number, rather than a value to compare with char92 count0 values. Thus, using -l =9 will end with the ninth page of the document, no matter what the pages are actually numbered. -m Specify manual feed for printer. -M Turns off the automatic font generation facility. If any fonts are missing, commands to generate the fonts are appended to the file missfont.log in the current directory; this file can then be executed and deleted to create the missing fonts. -n num At most num pages will be printed. Default is 100000. -N Turns off structured comments; this might be neces- sary on some systems that try to interpret PostScript comments in weird ways, or on some PostScript printers. Old versions of TranScript in particular cannot handle modern Encapsulated PostScript. -o name The output will be sent to file name If no file name is given, the default name is file.ps where the .dvi file was called file.dvi; if this option isn't given, any default in the configuration file is used. If the first character of the supplied output file name is an exclamation mark, then the remainder will be used as an argument to popen; thus, specifying !lpr as the output file will auto- matically queue the file for printing. This option also disables the automatic reading of the PRINTER environment variable, and turns off the automatic sending of control D if it was turned on with the -F option or in the configuration file; use -F after this option if you want both. -O offset Move the origin by a certain amount. The offset is a comma-separated pair of dimensions, such as .1in,-.3cm (in the same syntax used in the paper- size special). The origin of the page is shifted from the default position (of one inch down, one inch to the right from the upper left corner of the paper) by this amount. -p num The first page printed will be the first one num- bered num. Default is the first page in the docu- ment. If the num is prefixed by an equals sign, then it (and any argument to the -l option) is treated as a sequence number, rather than a value to compare with char92 count0 values. Thus, using -p =3 will start with the third page of the docu- ment, no matter what the pages are actually num- bered. -pp pagelist A comma-separated list of pages and ranges (a-b) may be given, which will be interpreted as char92 count0 values. Pages not specified will not be printed. Multiple -pp options may be specified or all pages and page ranges can be specified with one -pp option. -P printername Sets up the output for the appropriate printer. This is implemented by reading in con- fig.printername , which can then set the output pipe (as in, !lpr -Pprintername as well as the font paths and any other config.ps defaults for that printer only. Note that config.ps is read before config.printername In addition, another file called ~/.dvipsrc is searched for immediately after con- fig.ps; this file is intended for user defaults. If no -P command is given, the environment variable PRINTER is checked. If that variable exists, and a corresponding configuration file exists, that con- figuration file is read in. -q Run in quiet mode. Don't chatter about pages con- verted, etc.; report nothing but errors to standard error. -r Stack pages in reverse order. Normally, page 1 will be printed first. -s Causes the entire global output to be enclosed in a save/restore pair. This causes the file to not be truly conformant, and is thus not recommended, but is useful if you are driving the printer directly and don't care too much about the portability of the output. -S num Set the maximum number of pages in each `section'. This option is most commonly used with the -i option; see that documentation above for more information. -t papertype This sets the paper type to papertype. The paper- type should be defined in one of the configuration files, along with the appropriate code to select it. (Currently known types include letter, legal, ledger, a4, a3, ) You can also specify -t land- scape, which rotates a document by 90 degrees. To rotate a document whose size is not letter, you can use the -t option twice, once for the page size, and once for landscape. The upper left corner of each page in the .dvi file is placed one inch from the left and one inch from the top. Use of this option is highly dependent on the configuration file. Note that executing the letter or a4 or other PostScript operators cause the document to be nonconforming and can cause it not to print on cer- tain printers, so the paper size should not execute such an operator if at all possible. -T offset Set the paper size to the given pair of dimensions. This option takes its arguments in the same style as -O. It overrides any paper size special in the dvi file. -U Disable a PostScript virtual memory saving opti- mization that stores the character metric informa- tion in the same string that is used to store the bitmap information. This is only necessary when driving the Xerox 4045 PostScript interpreter. It is caused by a bug in that interpreter that results in `garbage' on the bottom of each character. Not recommended unless you must drive this printer. -x num Set the magnification ratio to num /1000. Overrides the magnification specified in the .dvi file. Must be between 10 and 100000. -X num Set the horizontal resolution in dots per inch to num. -Y num Set the vertical resolution in dots per inch to num. -Z Causes bitmapped fonts to be compressed before they are downloaded, thereby reducing the size of the PostScript font-downloading information. Espe- cially useful at high resolutions or when very large fonts are used. Will slow down printing somewhat, especially on early 68000-based PostScript printers. SEE ALSO mf(1), afm2tfm(1), tex(1), latex(1), lpr(1), dvips.tex. DIAGNOSTICS NOTES PostScript is a registered trademark of Adobe Systems Incorporated. AUTHOR Tomas Rokicki <rokicki@cs.stanford.edu>; extended to vir- tual fonts by Don Knuth.